Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing†in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.
We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.
Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.
Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!
So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.
What're your thoughts with regards to Home Furnace Maintenance?
Heating Repair And Routine Maintenance Tips
There are a few ways to maintain your furnace system. Odds are, during winter months your heater runs all day attempting to keep the house warm. In fact, it is probably on more than it needs to be because it is incapable of maintaining an efficient environment. There are several areas in the heating section to look at when troubleshooting for performance.
Replace The Air Filter
This is what you typically hear people speaking about most frequently, but so few people take the recommendation and do anything about it. If there is a obstruction, you either run the risk of not distributing heat appropriately or perhaps starting a fire.When the air conditioner filter becomes dirty air cannot flow through as well which suggests the unit must work overtime and will also mean a likelihood of fire. If the system is not circulating heat efficiently, it will be working overtime. You want to obviously remove any risk of fire. In both situations it is not good for peace of mind or your budget.
Assess The Blower
Check the blower blades and clean them. Should there be any buildup of dirt and dust, your fan will need to work harder to blow the air around, and the heating system will be overexerting itself. Therefore strain on your furnace system and your pocketbook since more energy is needed to constantly run the blower.
Fire Damper Function
Be sure to check your fire damper for correct functioning. The fire damper is self-explanatory so take note of this aspect.
Look For Holes In The Flex Duct
It is possible that your ducts have become impaired over the years for different reasons. If a duct has collapsed or become blocked, the system will think that the right temperature has been reached, which will not be true. When this will happen the system works harder to do its job but is going to be incapable to reach the desired tempurature.
Band Insulation
It is easy to miss the insulation, but is probably the most common reason behind a system out of order. Take take time to focus on the insulation between the duct work and the exterior to ensure it has not come loose. If this happens, your system will not reach optimal temperatures and work too much to try and accommodate.
Ductwork Needs To Be Connected
See that the ductwork does not become detached from other sections. Disconnected ductwork will permit warm air leak out and naturally add to the running costs.
Check For Leaks In The Return Air Inlets And Zone Dampers
Ensure that that return air intakes are free of dust and debris so air can flow easliy. Check your dampers to verify that they are in the best place. Now and again a damper will get moved by mistake like when you need to squeeze by it, or create space for storage. For a properly functioning system, check to see that your dampers are actually in the best position.
If these everyday jobs are more than what you are comfortable with, it may be wise to hire an area heating service licensed for furnace and gas furnaces. There will be numerous heating specialists around you who will care for all of this quite capably. The best advice we can offer is to establish annual upkeep for that appliance.
7 Home Heating System Types
It can be hard to let go of your old heating system and commit to a new one you hardly know. If you have an aging unit that needs replacement, however, it can be exciting to see the variety of heating technologies available as replacement options. All of these systems come in different models and sizes to accommodate your home. Consult a professional HVAC company for more information on installing or replacing a new heating system.
1. Furnace (forced air distribution system)
With a furnace (usually powered with gas), air is forced through a series of ducts. This distributes heated, conditioned air throughout the home. While furnaces can heat the air with electricity, propane, or oil, most U.S. homes utilize natural gas.
Gas furnaces are the most popular type of heating system since the forced air distribution system (ductwork) can be used by your air conditioner during the summer months.
2. Boiler (Radiator distribution system)
Boilers are another common heating system. They send hot water or steam through pipes to provide heating. While this enables you to practice zoned heating and cooling, they are also significantly more expensive to install and cost more money to run.
The reason why furnaces and boilers are known as central heating systems are because the heat is generated in a central area of the home and then distributed throughout the house.
3. Heat Pump
Heat pumps can be used to both heat and cool the home. They use refrigerant and electricity to transfer heat rather than generating it directly like a gas furnace. As a result, they are often much more efficient than other types of heating systems. Unfortunately, they work best in moderate climates where temperatures rarely dip below freezing.
4. Hybrid Heating
Hybrid heating combines the energy efficiency of a heat pump with the power of a gas furnace. Most of the time, the heat pump will operate to heat and cool your home. It is only during extreme temperatures that the furnace kicks on.
And since you aren’t just relying on one system, you will reduce significant strain on both units, thus significantly reducing the need for repairs and replacements.
5. Ductless Mini-Splits
By getting rid of the need for lots of air ducts, mini-split units allow you to create separate HVAC zones, each with a separate thermostat. This is very helpful in larger homes and add-on areas that don’t have ductwork installed.
6. Radiant Heating
Radiant heating sends hot water or electric heat through special tubes located in the floor (and sometimes in the ceiling or walls). The heat can be generated by oil, gas, propane, or electricity.
While the radiant heating distribution system can last a long time, repairs can become very expensive if a problem arises. The lifespan of radiant heat is dependent on its heat source system.
Learn more about the different types of heating systems.
In addition to the type of heating system you install, learn what else should affect your decision-making.
7. Baseboard Heaters
Usually reserved as supplemental heating or heating in an add-on, baseboard heating can be an effective and affordable choice. You have two choices when it comes to baseboard heating: electric or hydronic. Speak with your HVAC contractor for more information on baseboard heaters.
look here https://www.servicechampions.net/blog/7-home-heating-system-types/
I came across that entry on Home HVAC Repair while doing research the internet. Make sure you take a moment to promote this entry if you enjoyed it. I love your readership.